It supplies up to 30 Watts output to each port, so you can easily power and access up to four high-power PoE-compliant devices??? More power, with less cost and hassle This versatile midspan PoE+ injector is suited for almost all PoE device classes, including wireless access points, as well as IP phones and cameras.The high-power PoE+ injector offers 120W total power distribution and delivers full power??? Now, you can easily scale and power your PoE+ devices across long distances, even in remote locations where a typical power outlet is unavailable. Plus, the cost-effective Power over Ethernet+ injector lets you connect your PoE-powered devices (PDs) to a non-PoE-capable switch, avoiding the expense and aggravation of upgrading your existing switch to a PoE-enabled model. Easy to set up in mixed environments This injector is the perfect solution for a variety of environments. It features a wall-mountable rugged metal casing, but is palm-sized making it perfect for desktop placement too.
With plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow. Convenient, protected connections Not sure which class your PoE devices are? The Gigabit midspan PoE+ injector automatically detects the power requirements of your PoE PDs, and delivers the appropriate level of power without damaging your devices. With integrated circuit protection between each port, your devices are also protected from power interference.The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level.
For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
Red, blue, green, black, white. The way in which the network is working, e. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g. IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u.Type of cable technology performance. The minimum and maximum temperatures at which the product can be safely stored. The minimum and maximum temperatures at which the product can be safely operated. Weight of the packaged product. The distance from the top to the bottom of the packaging. The distance from the front to the back of the packaging. The distance from one side of the packaging to the other. Mean time between failures (MTBF). Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism. Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously. A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras. The greatest distance over which the data/signal can be transferred. The socket/plug where the DC electricity supply connects to the device. Power over Ethernet (PoE) ports quantity. Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet. The maximum amount of power used by the device. The voltage of the AC electricity that is inpitted into the product.
Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. The measurement of the product from head to foot or from base to top. The distance from the front to the back of something.
The measurement or extent of something from side to side. Com 4PORT GIGABIT POE+ MIDSPAN POWER OVER ETHERNET INJECTOR POEINJ4G" is in sale since Friday, October 19, 2018. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches". The seller is "morefrom" and is located in Sheffield. This item can be shipped to United Kingdom.